osc_measurement

Sets up commonly used configurations in the Oscilloscope, including the time base, channel signal source, and trigger.

This function is a convenience wrapper around the other functions here, allowing you to set up common configurations in a single call.

Parameters

t1 number required

Time from the trigger point to the left of screen

t2 number required

Time from the trigger point to the right of screen. (Must be a positive number, i.e. after the trigger event)

trigger_source string required

Trigger source

allowed values:

Moku:Lab	Input1, Input2, Output1, Output2, External
Moku:Go	Input1, Input2, Output1, Output2
Moku:Pro	Input1, Input2, Input3, Input4, Output1, Output2, Output3, Output4, External

edge string required

Which edge to trigger on. Only edge trigger is used with this function, pulse trigger can be enabled using set_trigger()

allowed values:Rising, Falling, Both

level number required

Trigger level

allowed values:

Moku:Lab	-5 to 5
Moku:Go	-5 to 5
Moku:Pro	-20 to 20

units: V

strict boolean

Disable all implicit conversions and coercions.

default: true

Examples

Sample response

{
    "edge": "Rising",
    "level": 1.0,
    "offset": 0.0,
    "span": 1e-5,
    "trigger_source": "Input1"
}