# Logic Analyzer
The Logic Analyzer / Pattern Generator can measure or generate up to 16 channels of digital signal. The output digital signal can be programmed to Low, High, or a custom pattern.
If you are directly using the RESTful API (e.g. using cURL), the instrument
name as used in the URL is logicanalyzer.
# Available states for a pin are:
| State | Description |
|---|---|
| I | Input |
| PG1 | PatternGenerator1 |
| PG2 | PatternGenerator2 |
| X | Removes Pin |
# Available output overrides for a pin are:
| State | Description |
|---|---|
| H | High |
| L | Low |
| X | Off |
Functions
Core
- Multi-instrument: Logic Analyzer in multi-instrument context
- disable_pattern_generator: Disables the given Pattern Generator
- enable_rollmode: Enables and disables Roll Mode X-axis behaviour
- get_data: Get current sweep data.
- get_pin: Get current state of a Digital I/O pin
- get_pins: Get current state of all Digital I/O pins
- getters: Logic Analyzer - getter functions
- restart_pattern: Restart patterns on the given Pattern Generator
- save_high_res_buffer: Save the high resolution channel buffer data to a file on the Moku's internal storage
- set_analog_mode: Sets the threshold voltages of analog inputs
- set_can_decoder: Configure CAN decoder on a given channel
- set_decoder: Configure decoder on the given channel
- set_defaults: Set the Logic Analyzer to its default state
- set_i2c_decoder: Configure decoder on the given channel
- set_i2s_decoder: Configure decoder on the given channel
- set_parallel_bus_decoder: Configure ParallelBus decoder on a given channel
- set_pattern_generator: Generate pattern on a single channel
- set_pin: Set the state of a single digital I/O pin
- set_pin_mode: Sets the state of Moku:Go's digital IO to either input or output
- set_pins: Set the state of the digital I/O pins
- set_source: Sets the source of Logic Analyzer's input to either digital I/O or analog inputs
- set_spi_decoder: Configure decoder on the given channel
- set_timebase: Sets the left- and right-hand span for the time axis. Units are seconds relative to the trigger point.
- set_trigger: Configures the trigger on pin(s).
- set_uart_decoder: Configure decoder on the given channel
- summary: Returns a short summary of current instrument state